The above products are all retail prices

  • English
Cart

    Your cart is currently empty.

flame aromatherapy machine how to use

  flame aromatherapy machine how to use

  To use a flame aromatherapy machine, follow these general steps:

  Fill the water tank: Open the diffuser and add water up to the maximum fill line, typically around 200ml.

  Add essential oils: Put 1-2 drops of your chosen aromatherapy essential oil into the water.

  Power on: Connect the device to a power source, usually via USB, and press the power button to turn it on.

  Adjust settings:

  Press the left button to turn the diffuser on/off.

  Press the right button to control the LED lights:

  1st press: Yellow light

  2nd press: 7-color changing mode

  3rd press: Keep current color

  4th press: Turn off lights

  Select flame mode: Most flame diffusers offer two flame modes - soft and fierce. Choose the one that suits your preference.

  Enjoy the ambiance: The device will create a realistic flame effect using LED lights combined with the mist, while dispersing the essential oil aroma.

  Auto shut-off: The machine will automatically turn off when the water runs out for safety.

  Remember to clean the diffuser regularly and refill it when needed. The wide opening makes it easy to clean and refill. These flame aromatherapy machines typically operate quietly (around 20dB) and can run for 2-8 hours depending on the settings.

  Always follow the specific instructions provided with your particular model, as features may vary slightly between different flame aromatherapy machines.

Older Post Newer Post
Translation missing: en.general.search.loading